Modeling \u2022 Calculations \u2022 Documentation \u2022 BIM Integration<\/h4>\nIgentSuite is integrated software for the design of building structures<\/strong>, developed for structural engineers, engineers and architects. The platform combines parametric structural modeling, structural analysis, reinforcement design, technical documentation and BIM integration<\/strong>.<\/h4>\nIgentSuite consists of three interconnected programs: IgentForm<\/strong> for structural modeling and analysis, IgentDraw<\/strong> for reinforcement design and documentation, and IgentBeam<\/strong> for multi-span beam calculations. The shared environment allows data to be used throughout the design process \u2013 from modeling and analysis, through design, to structural documentation.<\/h4>\n________________________________________<\/p>\n
\n- \n
IgentForm <\/strong><\/span>\u2013 Modeling and Structural Analysis<\/h2>\n<\/li>\n<\/ol>\n\n- \n
Parametric modeling of any 3D shape, including complex roof structures, with the possibility to create surfaces based on structural deformations under any load.<\/h4>\n<\/li>\n
- \n
Analysis of linear and surface structures.<\/h4>\n<\/li>\n
- \n
Analysis of multi-story buildings using Loat TakeDown Method<\/h4>\n<\/li>\n<\/ul>\n\u2013 Floors calculated using the Influence Surface Method or the Finite Element Method (integrated solver).<\/h4>\n– Seismic analysis using the method of load distribution according to the stiffness of elements (RPS2011)<\/h4>\n\n- \n
Finite element analysis of structures (Autodesk Robot calculation engine) \u2013 available for Autodesk Robot users<\/h4>\n<\/li>\n
- \n
Inclusion of prestressing tendons in calculations (cable loads, prestressing losses, verification of code conditions)<\/h4>\n<\/li>\n
- \n
Pre-dimensioning of reinforced concrete structures<\/h4>\n<\/li>\n
- \n
Calculation of theoretical reinforcement areas<\/h4>\n<\/li>\n
- \n
Possibility to generate multiple structure variants and optimize them according to specified criteria (e.g., weight, cost)<\/h4>\n<\/li>\n
- \n
Possibility to export models to architectural programs<\/h4>\n<\/li>\n<\/ul>\n– Export in IFC format<\/h4>\n– Export in JSON format (Grasshopper\/Rhino, with the option of subsequent transfer to Revit via Rhino.Inside.Revit or Archicad via Archicad Live Connection)<\/h4>\n
____________________________________________________<\/p>\n
\n- \n
IgentDraw <\/strong><\/span>\u2013 Documentation of reinforced concrete structures<\/h2>\n<\/li>\n<\/ol>\n\n- \n
Parametric creation of reinforcement drawings (beams, columns, walls, slabs, foundations, and shafts in foundation slabs).<\/h4>\n<\/li>\n
- \n
Automatic generation of drawings, reinforcement schedules, and 3D reinforcement after modifying any parameter (e.g. reinforcement diameter, bar shape, hole position and others).<\/h4>\n<\/li>\n
- \n
Integration with the IgentForm model<\/h4>\n<\/li>\n<\/ul>\n– Automatic creation of reinforcement regions after model import<\/h4>\n– Possibility to automatically create reinforcement based on theoretical reinforcement areas calculated in IgentForm or manually entered in IgentDraw (columns, beams)<\/h4>\n– Possibility of importing and displaying theoretical crosses of reinforcement surfaces calculated in IgentForm (plates)<\/h4>\n\n- \n
Generation of documentation for prestressing tendons (drawings, specifications, 3D model).<\/h4>\n<\/li>\n
- \n
Export of 2D drawings in DXF format.<\/h4>\n<\/li>\n
- \n
Export of 3D reinforcement in IFC format.<\/h4>\n<\/li>\n
- \n
Possibility to work with prestressing tendons and typical reinforcement in a single project<\/h4>\n<\/li>\n<\/ul>\n
____________________________________________________<\/p>\n
\n- \n
IgentBeam <\/strong><\/span>\u2013 Multi-span Beam Calculator<\/h2>\n<\/li>\n<\/ol>\n\n- \n
Calculations of multi-span beams with the option of optimizing prestressing tendon trajectory.<\/h4>\n<\/li>\n
- \n
Connection to IgentForm for cable optimization.<\/h4>\n<\/li>\n<\/ul>\n
____________________________________________________<\/p>\n
BIM Integration<\/strong><\/span><\/h2>\n\n- \n
IFC export (structure model, 3D reinforcement, 3D prestressing cables)<\/h4>\n<\/li>\n
- \n
RTD export (Autodesk Robot)<\/h4>\n<\/li>\n
- \n
JSON export \u2192 Grasshopper \u2192 Rhino \/ Revit \/ Archicad.<\/h4>\n<\/li>\n
- \n
DXF import (file-based modeling)<\/h4>\n<\/li>\n
- \n
DXF export (documentation).<\/h4>\n<\/li>\n
- \n
Consistent geometry, common calculation platform and database.<\/h4>\n<\/li>\n<\/ul>\nWhy choose Igent Suite<\/span>?<\/strong><\/h2>\n\n- \n
A single environment for the entire process: modeling \u2192 analysis \u2192 documentation<\/h4>\n<\/li>\n
- \n
Connects the worlds of construction, architecture, and parametric modeling.<\/h4>\n<\/li>\n
- \n
Open data format enables easy integration with office design processes.<\/h4>\n<\/li>\n
- \n
Ultra-fast modeling of typical and advanced structures<\/h4>\n<\/li>\n
- \n
Modern internal architecture (C# programming language, parallel programming, shared source code).<\/h4>\n<\/li>\n<\/ul>\n\n
\n![\"obrazek1\"](\"https:\/\/igentform.com\/wp-content\/uploads\/2020\/07\/IF_Logo48.png\")
IgentForm<\/strong><\/span>\u00a0 – it is a unique program for parametric modeling of the structure. The <Solid construction> mode is intended for engineers as a tool for quickly creating advanced geometric forms, as well as for architects as a tool supporting work at the conceptual stage of the project. The <Building> mode enables modeling, calculations and pre-sizing of typical multi-story buildings.<\/h4>\nIn\u00a0IgentForm<\/strong>\u00a0structure model consists of one or more masses whose mutual position can be determined by means of appropriate parameters (eg. The position of one mass above another or cutting one mass to another).<\/h4>\nAt the level of a single mass parameterization is subject to, among others, contour and shape of the mass, the amount of floors and roof structure. Additionally, the program\u00a0IgentForm<\/strong>\u00a0introduces the concept of structural lines (by default these are all external contour lines with the possibility to add a line inside the contour), for which you can define the structural arrangement consisting of beams, columns, walls, trusses, etc.<\/h4>\nAfter each change of any parameter, model of a 3D structure is automatically regenerated and visualized in real time.<\/h4>\n
\nIgentDraw<\/span> – is a unique program for parametric creation of reinforcement drawings. In the current version modules of plates, walls and columns are available. A typical way of working is importing a DXF background, definition of reinforcement regions (with the possibility of automatic recognition of contours from a selected layer) and setting reinforcement parameters. Reinforcement is generated and drawings are created automatically when any parameter is changed. In the case of plates and walls, the program provides, among others automatic cutting of bars to openings, division of bars taking into account lap lengths, reinforcement at an angle or the possibility of generating edge reinforcement. Real-time regeneration of the entire model after each modification ensures consistency of created documentation both at the drawing and aggregate reinforcement table levels.<\/h4>\n<\/h2>\nIgentBeam<\/span><\/strong> is a parametric multi-span beam calculator that enables calculations using the finite element method. These calculations are performed automatically after change of any parameter. The program enables the definition of prestressing tendons, optimization of their curve and automatic generation of cable loads. It is also possible to export such generated loads to Autodesk Robot Structural Analysis program. A short film showing the possibilities of the program can be seen at https:\/\/youtu.be\/NZJQ_988YA0<\/a><\/h4>\n
\nIgentForm company also creates custom parametric software. Two programs have been created in this mode:
\nIgentGP –<\/strong> a program for creating documentation and 3D visualization for prestressed constructions in cooperation with GP-Projekt ![\"obrazek1\"](\"https:\/\/igentform.com\/wp-content\/uploads\/2018\/11\/Logo.png\")
<\/h4>\nIgentPres<\/strong> – a program aimed at accelerating the implementation of the compression project in the field of BIM 3D documentation in cooperation with Warbud SA.<\/h4>\nAll programs can work in Polish, English and French.<\/h4>\n<\/section>\n
\nNews<\/strong><\/span><\/h2>\n
\n2025.09.10<\/h4>\nIgentForm is developing access to the latest technologies. The parametric structure modeler has been adapted to the BIMvision environment (comprehensive IFC file support) and is now available as a plug-in called IgentBIM. This functionality extends the BIMvision environment with editing capabilities. Intuitive parameterization allows you to quickly create advanced models, as well as various variants of the same structure, along with their evaluation according to various criteria. I encourage you to learn more about this innovative functionality at https:\/\/bimvision.eu<\/h4>\n2024.07.15<\/h4>\nIgentForm<\/strong> company has entered into cooperation with Robobat Afrique<\/strong> (www.robobatmaroc.com<\/a>), which has received exclusive rights to distribute IgentForm and IgentDraw programs in French-speaking markets. Details here<\/a><\/h4>\n2022.11.28<\/strong><\/h4>\nIgentDraw<\/span> program has been enhanced with the ability to create drawings for spread footings<\/h4>\n2022.11.25<\/strong><\/h4>\nThe latest version of IgentForm<\/span>\u00a0progrm has been approved as a tool to support the design process in conjunction with Autodesk Robot Structural Analysis and Autodesk Revit and is available in the online store Autodesk AppStore (https:\/\/apps.autodesk.com\/pl<\/a>)<\/h4>\n2022.11.10<\/strong><\/h4>\nAll IgentForm programs have been equipped with a digital signature<\/h4>\n2022.10.07<\/strong><\/h4>\nIgentForm software was presented during the international BATIMAT Construction Fair in Paris on 2022.10.03 – 2022.10.06<\/h4>\n\u00a02022.02.24<\/strong><\/h4>\nIgentBeam – parametric multi-span beam calculator<\/span><\/h3>\nThe IgentBeam program has been added to the offer, which enables the calculation of multi-span beams using the finite element method.<\/h4>\n2020.12.11<\/strong><\/h4>\nMany companies appreciate the benefits of using the BIM approach in design practice.<\/span> One of them is BUREAU D’ETUDES STRUCTURALIS based in Paris, which promotes and offers solutions based on this technology.<\/span> At https:\/\/structalis.fr<\/a><\/span> you can find, among others<\/span> a list of especially recommended plugins \/programs for Autodesk Revit, including IgentForm.<\/span><\/h4>\n2020.11.03<\/strong>
\nProgram IgentDraw<\/span> , in addition to the parametric creation of drawings of plates, walls and columns, has been enhanced with the possibility of creating drawings for beams. Thanks to this, it is possible to obtain complete drawing documentation for the most common reinforced concrete elements<\/h4>\n2020.09.08<\/strong><\/h4>\nProgram<\/span> IgentForm<\/span><\/span> has been approved as a design support tool in conjunction with Autodesk Robot Structural Analysis and Autodesk Revit and is available in the Autodesk AppStore online store\u00a0(https:\/\/apps.autodesk.com\/pl<\/a><\/span>)<\/strong><\/h4>\n\n
\n![\"obrazek1\"](\"https:\/\/igentform.com\/wp-content\/uploads\/2020\/02\/Budma1EN.png\")
<\/p>\n
Thank you very much to everyone who visited our company stand during Budma 2020 Fair, which took place in Pozna\u0144 in February 2020.02.04 – 2020.02.07<\/h4>\n
![\"obrazek1\"](\"https:\/\/igentform.com\/wp-content\/uploads\/2020\/02\/Budma2.png\")
<\/p>\n\nAttention\u00a0<\/strong>(06.12.2019) –\u00a0IgentDraw<\/strong>\u00a0– parametric creation of reinforcement drawings for columns\u00a0(description below)\u00a0<\/span><\/span><\/h4>\n
\n<\/section>\nIgentDraw – parametric creation of column reinforcement drawings<\/span><\/h3>\n06.12.2019<\/span> – In addition to the possibility of parametric creation of\u00a0plates and walls drawings, the IgentDraw program has been enhanced with the ability to create drawings for columns. Using a parametric approach, creating documentation can be several times faster than using traditional tools. The possibility of working on a DXF foundation, the option of automatic recognition of column cross-sections from a selected layer, and the mechanism of reinforcement generation by assigning appropriate longitudinal and transverse reinforcement patterns mean that in a few minutes documentation can be created even for a large structure. In addition, thanks to the unique real-time regeneration mechanism of the entire model after each modification, the program ensures consistency of created documentation at both the level of drawings and the\u00a0aggregate\u00a0reinforcement table, which is particularly important in case of subsequent changes in the design.<\/h4>\nPrestressed structures<\/span><\/strong><\/h3>\n30.11.2018<\/span>\u00a0– One of the forms of IgentForm’s activities is the creation of specialized software for the needs of construction and architecture, based on the latest IT technologies using, among others, parallel processing capabilities.<\/h4>\nThe company IgentForm has recently started cooperation with the company\u00a0\u00a0gp-projekt\u00a0<\/span>(http:\/\/www.gp-projekt.pl<\/a><\/span>),\u00a0specializing in the design of prestressed structures for building construction. On commission and in cooperation with gp-project<\/span>\u00a0an innovative program called IgentGP was created, which significantly accelerates the creation of project documentation, and one of its unique features is the ability to write generated 3D tendons in IFC format, which allows their use in projects made in BIM technology. The program allows the generation of tendons with a different number of strands with covers in all commonly used compression systems as well as the definition and generation of safety zones due to the potential drilling or punching in concrete beams.<\/h4>\n\u201eIncreasing competitiveness requires the actual implementation of innovative solutions that allow the delivery of modern and useful products to investors, contractors and architects. Implementation of this idea would not be possible without cooperation with IgentForm, which properly understood our need and creatively and patiently worked to achieve the intended goal. This is how we imagined good and flexible cooperation.\u201d<\/em><\/span><\/h4>\n![\"obrazek1\"](\"https:\/\/igentform.com\/wp-content\/uploads\/2018\/11\/Tendon3D.png\")
<\/h4>\ngp-project<\/span> is a design studio providing services in the field of designing construction structures at every stage of the investment. The studio’s specialty is conceptual and optimization projects in which modern solutions and technologies are used, in particular monolithic compression. The company’s portfolio includes numerous facilities completed in Poland and abroad. More information about the company can be found at http:\/\/www.gp-projekt.pl<\/span><\/span><\/span><\/h4>\n
\nCompanies interested in creating a dedicated, high-quality and reliable software are asked to contact us at office@igentform.com<\/span><\/span><\/span><\/h4>\nATTENTION: Load TakeDown<\/strong><\/span><\/h4>\n15.06.2018 – In IgentForm, the next step was done to implement the calculation capabilities according to the Load TakeDown method. To the possibility of displaying the influence surfaces, the possibility of distributing loads from plates to elements directly supporting the plates\u00a0 and the possibility to export these loads to\u00a0 Autodesk Robot Structural Analysis program have been added. Details in the User Zone<\/span><\/h4>\n28\/03\/2018 – A new program called IgentPres<\/span> has been added to the offer. It was created in response to the needs of Warbud SA<\/span>, one of the largest construction companies in Poland (www.warbud.pl<\/span>). The software was to help speed up the implementation of the compression project in the field of BIM 3D documentation of the currently built office facility in Warsaw. At present, in the program, based on 2D workshop drawings, it is possible to recover geometry 3D of tendons, parameterize them (anchor types, number of strands, strength parameters, protection zones) and export 3D models of these tendons to IFC format<\/h4>\nATTENTION: Novelty<\/strong><\/span><\/h4>\nOn 16.11.2017 IgentDraw<\/strong><\/span> program was added to the offer designed for parametric creation of\u00a0 reinforcement drawings for plates. It was created in the same technology as the IgentForm program. It has the ability to work on DXF background. The final result is the ability to save the drawing and the summary reinforcement table in DXF format. A short description of the functionality of the program can be found below, and a free demo version of the program can be downloaded in the Download section<\/h4>\n
\nIn the current semester in the Department of Building Constructions of the University of Technology and Life Sciences in Bydgoszcz, the IgentForm<\/strong> program will be used by students for modeling of steel towers used for assembly of mobile devices. The coordinator of the project exercise is Mr MSc. Jaros\u0142aw Gajewski. A short English-language video on modeling is available at\u00a0\u00a0https:\/\/youtu.be\/rbYPkQP4O9I<\/a><\/h4>\n
\n26.09.2017 at the Cracow University of Technology was presented and defended diploma thesis by Mrs. Marta T\u0142u\u015bcik entitled “Application of IgentForm program in the practice of parametric design and structural optimisation using BIM technology<\/span>“, led by Dr Eng. Jacek Magiera. Below is a brief outline of a selected piece of work connected with modeling of one of the towers of Absolute Towers complex in Canada.<\/span><\/h4>\nDownload<\/a><\/h2>\n![\"obrazek1\"](\"https:\/\/igentform.com\/wp-content\/uploads\/2017\/09\/AT50.png\")
<\/p>\n
\nATTENTION: Change of the name<\/strong><\/span><\/h3>\nWe inform, that on 30.05.2017 the company name has been changed from IntelForm to IgentForm (new domain www.igentform.com<\/span>)<\/span>
\nDuring the transitional period both old and new name may exist<\/h3>\n
\nFree educational version<\/span>
\nDetails in section Order the program<\/strong><\/h3>\n
\n\u00a0 NOVELTIES: Possibility to generate solids based on DXF \u00a0(29.06.2017)<\/span><\/h3>\nDetails in section User zone<\/strong><\/h3>\n
IgentSuite consists of three interconnected programs: IgentForm<\/strong> for structural modeling and analysis, IgentDraw<\/strong> for reinforcement design and documentation, and IgentBeam<\/strong> for multi-span beam calculations. The shared environment allows data to be used throughout the design process \u2013 from modeling and analysis, through design, to structural documentation.<\/h4>\n________________________________________<\/p>\n
\n- \n
IgentForm <\/strong><\/span>\u2013 Modeling and Structural Analysis<\/h2>\n<\/li>\n<\/ol>\n\n- \n
Parametric modeling of any 3D shape, including complex roof structures, with the possibility to create surfaces based on structural deformations under any load.<\/h4>\n<\/li>\n
- \n
Analysis of linear and surface structures.<\/h4>\n<\/li>\n
- \n
Analysis of multi-story buildings using Loat TakeDown Method<\/h4>\n<\/li>\n<\/ul>\n\u2013 Floors calculated using the Influence Surface Method or the Finite Element Method (integrated solver).<\/h4>\n– Seismic analysis using the method of load distribution according to the stiffness of elements (RPS2011)<\/h4>\n\n- \n
Finite element analysis of structures (Autodesk Robot calculation engine) \u2013 available for Autodesk Robot users<\/h4>\n<\/li>\n
- \n
Inclusion of prestressing tendons in calculations (cable loads, prestressing losses, verification of code conditions)<\/h4>\n<\/li>\n
- \n
Pre-dimensioning of reinforced concrete structures<\/h4>\n<\/li>\n
- \n
Calculation of theoretical reinforcement areas<\/h4>\n<\/li>\n
- \n
Possibility to generate multiple structure variants and optimize them according to specified criteria (e.g., weight, cost)<\/h4>\n<\/li>\n
- \n
Possibility to export models to architectural programs<\/h4>\n<\/li>\n<\/ul>\n– Export in IFC format<\/h4>\n– Export in JSON format (Grasshopper\/Rhino, with the option of subsequent transfer to Revit via Rhino.Inside.Revit or Archicad via Archicad Live Connection)<\/h4>\n
____________________________________________________<\/p>\n
\n- \n
IgentDraw <\/strong><\/span>\u2013 Documentation of reinforced concrete structures<\/h2>\n<\/li>\n<\/ol>\n\n- \n
Parametric creation of reinforcement drawings (beams, columns, walls, slabs, foundations, and shafts in foundation slabs).<\/h4>\n<\/li>\n
- \n
Automatic generation of drawings, reinforcement schedules, and 3D reinforcement after modifying any parameter (e.g. reinforcement diameter, bar shape, hole position and others).<\/h4>\n<\/li>\n
- \n
Integration with the IgentForm model<\/h4>\n<\/li>\n<\/ul>\n– Automatic creation of reinforcement regions after model import<\/h4>\n– Possibility to automatically create reinforcement based on theoretical reinforcement areas calculated in IgentForm or manually entered in IgentDraw (columns, beams)<\/h4>\n– Possibility of importing and displaying theoretical crosses of reinforcement surfaces calculated in IgentForm (plates)<\/h4>\n\n- \n
Generation of documentation for prestressing tendons (drawings, specifications, 3D model).<\/h4>\n<\/li>\n
- \n
Export of 2D drawings in DXF format.<\/h4>\n<\/li>\n
- \n
Export of 3D reinforcement in IFC format.<\/h4>\n<\/li>\n
- \n
Possibility to work with prestressing tendons and typical reinforcement in a single project<\/h4>\n<\/li>\n<\/ul>\n
____________________________________________________<\/p>\n
\n- \n
IgentBeam <\/strong><\/span>\u2013 Multi-span Beam Calculator<\/h2>\n<\/li>\n<\/ol>\n\n- \n
Calculations of multi-span beams with the option of optimizing prestressing tendon trajectory.<\/h4>\n<\/li>\n
- \n
Connection to IgentForm for cable optimization.<\/h4>\n<\/li>\n<\/ul>\n
____________________________________________________<\/p>\n
BIM Integration<\/strong><\/span><\/h2>\n\n- \n
IFC export (structure model, 3D reinforcement, 3D prestressing cables)<\/h4>\n<\/li>\n
- \n
RTD export (Autodesk Robot)<\/h4>\n<\/li>\n
- \n
JSON export \u2192 Grasshopper \u2192 Rhino \/ Revit \/ Archicad.<\/h4>\n<\/li>\n
- \n
DXF import (file-based modeling)<\/h4>\n<\/li>\n
- \n
DXF export (documentation).<\/h4>\n<\/li>\n
- \n
Consistent geometry, common calculation platform and database.<\/h4>\n<\/li>\n<\/ul>\nWhy choose Igent Suite<\/span>?<\/strong><\/h2>\n\n- \n
A single environment for the entire process: modeling \u2192 analysis \u2192 documentation<\/h4>\n<\/li>\n
- \n
Connects the worlds of construction, architecture, and parametric modeling.<\/h4>\n<\/li>\n
- \n
Open data format enables easy integration with office design processes.<\/h4>\n<\/li>\n
- \n
Ultra-fast modeling of typical and advanced structures<\/h4>\n<\/li>\n
- \n
Modern internal architecture (C# programming language, parallel programming, shared source code).<\/h4>\n<\/li>\n<\/ul>\n\n
\nIgentForm<\/strong><\/span>\u00a0 – it is a unique program for parametric modeling of the structure. The <Solid construction> mode is intended for engineers as a tool for quickly creating advanced geometric forms, as well as for architects as a tool supporting work at the conceptual stage of the project. The <Building> mode enables modeling, calculations and pre-sizing of typical multi-story buildings.<\/h4>\nIn\u00a0IgentForm<\/strong>\u00a0structure model consists of one or more masses whose mutual position can be determined by means of appropriate parameters (eg. The position of one mass above another or cutting one mass to another).<\/h4>\nAt the level of a single mass parameterization is subject to, among others, contour and shape of the mass, the amount of floors and roof structure. Additionally, the program\u00a0IgentForm<\/strong>\u00a0introduces the concept of structural lines (by default these are all external contour lines with the possibility to add a line inside the contour), for which you can define the structural arrangement consisting of beams, columns, walls, trusses, etc.<\/h4>\nAfter each change of any parameter, model of a 3D structure is automatically regenerated and visualized in real time.<\/h4>\n
\nIgentDraw<\/span> – is a unique program for parametric creation of reinforcement drawings. In the current version modules of plates, walls and columns are available. A typical way of working is importing a DXF background, definition of reinforcement regions (with the possibility of automatic recognition of contours from a selected layer) and setting reinforcement parameters. Reinforcement is generated and drawings are created automatically when any parameter is changed. In the case of plates and walls, the program provides, among others automatic cutting of bars to openings, division of bars taking into account lap lengths, reinforcement at an angle or the possibility of generating edge reinforcement. Real-time regeneration of the entire model after each modification ensures consistency of created documentation both at the drawing and aggregate reinforcement table levels.<\/h4>\n<\/h2>\nIgentBeam<\/span><\/strong> is a parametric multi-span beam calculator that enables calculations using the finite element method. These calculations are performed automatically after change of any parameter. The program enables the definition of prestressing tendons, optimization of their curve and automatic generation of cable loads. It is also possible to export such generated loads to Autodesk Robot Structural Analysis program. A short film showing the possibilities of the program can be seen at https:\/\/youtu.be\/NZJQ_988YA0<\/a><\/h4>\n
\nIgentForm company also creates custom parametric software. Two programs have been created in this mode:
\nIgentGP –<\/strong> a program for creating documentation and 3D visualization for prestressed constructions in cooperation with GP-Projekt <\/h4>\nIgentPres<\/strong> – a program aimed at accelerating the implementation of the compression project in the field of BIM 3D documentation in cooperation with Warbud SA.<\/h4>\nAll programs can work in Polish, English and French.<\/h4>\n<\/section>\n
\nNews<\/strong><\/span><\/h2>\n
\n2025.09.10<\/h4>\nIgentForm is developing access to the latest technologies. The parametric structure modeler has been adapted to the BIMvision environment (comprehensive IFC file support) and is now available as a plug-in called IgentBIM. This functionality extends the BIMvision environment with editing capabilities. Intuitive parameterization allows you to quickly create advanced models, as well as various variants of the same structure, along with their evaluation according to various criteria. I encourage you to learn more about this innovative functionality at https:\/\/bimvision.eu<\/h4>\n2024.07.15<\/h4>\nIgentForm<\/strong> company has entered into cooperation with Robobat Afrique<\/strong> (www.robobatmaroc.com<\/a>), which has received exclusive rights to distribute IgentForm and IgentDraw programs in French-speaking markets. Details here<\/a><\/h4>\n2022.11.28<\/strong><\/h4>\nIgentDraw<\/span> program has been enhanced with the ability to create drawings for spread footings<\/h4>\n2022.11.25<\/strong><\/h4>\nThe latest version of IgentForm<\/span>\u00a0progrm has been approved as a tool to support the design process in conjunction with Autodesk Robot Structural Analysis and Autodesk Revit and is available in the online store Autodesk AppStore (https:\/\/apps.autodesk.com\/pl<\/a>)<\/h4>\n2022.11.10<\/strong><\/h4>\nAll IgentForm programs have been equipped with a digital signature<\/h4>\n2022.10.07<\/strong><\/h4>\nIgentForm software was presented during the international BATIMAT Construction Fair in Paris on 2022.10.03 – 2022.10.06<\/h4>\n\u00a02022.02.24<\/strong><\/h4>\nIgentBeam – parametric multi-span beam calculator<\/span><\/h3>\nThe IgentBeam program has been added to the offer, which enables the calculation of multi-span beams using the finite element method.<\/h4>\n2020.12.11<\/strong><\/h4>\nMany companies appreciate the benefits of using the BIM approach in design practice.<\/span> One of them is BUREAU D’ETUDES STRUCTURALIS based in Paris, which promotes and offers solutions based on this technology.<\/span> At https:\/\/structalis.fr<\/a><\/span> you can find, among others<\/span> a list of especially recommended plugins \/programs for Autodesk Revit, including IgentForm.<\/span><\/h4>\n2020.11.03<\/strong>
\nProgram IgentDraw<\/span> , in addition to the parametric creation of drawings of plates, walls and columns, has been enhanced with the possibility of creating drawings for beams. Thanks to this, it is possible to obtain complete drawing documentation for the most common reinforced concrete elements<\/h4>\n2020.09.08<\/strong><\/h4>\nProgram<\/span> IgentForm<\/span><\/span> has been approved as a design support tool in conjunction with Autodesk Robot Structural Analysis and Autodesk Revit and is available in the Autodesk AppStore online store\u00a0(https:\/\/apps.autodesk.com\/pl<\/a><\/span>)<\/strong><\/h4>\n\n
\n<\/p>\n
Thank you very much to everyone who visited our company stand during Budma 2020 Fair, which took place in Pozna\u0144 in February 2020.02.04 – 2020.02.07<\/h4>\n
<\/p>\n\nAttention\u00a0<\/strong>(06.12.2019) –\u00a0IgentDraw<\/strong>\u00a0– parametric creation of reinforcement drawings for columns\u00a0(description below)\u00a0<\/span><\/span><\/h4>\n
\n<\/section>\nIgentDraw – parametric creation of column reinforcement drawings<\/span><\/h3>\n06.12.2019<\/span> – In addition to the possibility of parametric creation of\u00a0plates and walls drawings, the IgentDraw program has been enhanced with the ability to create drawings for columns. Using a parametric approach, creating documentation can be several times faster than using traditional tools. The possibility of working on a DXF foundation, the option of automatic recognition of column cross-sections from a selected layer, and the mechanism of reinforcement generation by assigning appropriate longitudinal and transverse reinforcement patterns mean that in a few minutes documentation can be created even for a large structure. In addition, thanks to the unique real-time regeneration mechanism of the entire model after each modification, the program ensures consistency of created documentation at both the level of drawings and the\u00a0aggregate\u00a0reinforcement table, which is particularly important in case of subsequent changes in the design.<\/h4>\nPrestressed structures<\/span><\/strong><\/h3>\n30.11.2018<\/span>\u00a0– One of the forms of IgentForm’s activities is the creation of specialized software for the needs of construction and architecture, based on the latest IT technologies using, among others, parallel processing capabilities.<\/h4>\nThe company IgentForm has recently started cooperation with the company\u00a0\u00a0gp-projekt\u00a0<\/span>(http:\/\/www.gp-projekt.pl<\/a><\/span>),\u00a0specializing in the design of prestressed structures for building construction. On commission and in cooperation with gp-project<\/span>\u00a0an innovative program called IgentGP was created, which significantly accelerates the creation of project documentation, and one of its unique features is the ability to write generated 3D tendons in IFC format, which allows their use in projects made in BIM technology. The program allows the generation of tendons with a different number of strands with covers in all commonly used compression systems as well as the definition and generation of safety zones due to the potential drilling or punching in concrete beams.<\/h4>\n\u201eIncreasing competitiveness requires the actual implementation of innovative solutions that allow the delivery of modern and useful products to investors, contractors and architects. Implementation of this idea would not be possible without cooperation with IgentForm, which properly understood our need and creatively and patiently worked to achieve the intended goal. This is how we imagined good and flexible cooperation.\u201d<\/em><\/span><\/h4>\n<\/h4>\ngp-project<\/span> is a design studio providing services in the field of designing construction structures at every stage of the investment. The studio’s specialty is conceptual and optimization projects in which modern solutions and technologies are used, in particular monolithic compression. The company’s portfolio includes numerous facilities completed in Poland and abroad. More information about the company can be found at http:\/\/www.gp-projekt.pl<\/span><\/span><\/span><\/h4>\n
\nCompanies interested in creating a dedicated, high-quality and reliable software are asked to contact us at office@igentform.com<\/span><\/span><\/span><\/h4>\nATTENTION: Load TakeDown<\/strong><\/span><\/h4>\n15.06.2018 – In IgentForm, the next step was done to implement the calculation capabilities according to the Load TakeDown method. To the possibility of displaying the influence surfaces, the possibility of distributing loads from plates to elements directly supporting the plates\u00a0 and the possibility to export these loads to\u00a0 Autodesk Robot Structural Analysis program have been added. Details in the User Zone<\/span><\/h4>\n28\/03\/2018 – A new program called IgentPres<\/span> has been added to the offer. It was created in response to the needs of Warbud SA<\/span>, one of the largest construction companies in Poland (www.warbud.pl<\/span>). The software was to help speed up the implementation of the compression project in the field of BIM 3D documentation of the currently built office facility in Warsaw. At present, in the program, based on 2D workshop drawings, it is possible to recover geometry 3D of tendons, parameterize them (anchor types, number of strands, strength parameters, protection zones) and export 3D models of these tendons to IFC format<\/h4>\nATTENTION: Novelty<\/strong><\/span><\/h4>\nOn 16.11.2017 IgentDraw<\/strong><\/span> program was added to the offer designed for parametric creation of\u00a0 reinforcement drawings for plates. It was created in the same technology as the IgentForm program. It has the ability to work on DXF background. The final result is the ability to save the drawing and the summary reinforcement table in DXF format. A short description of the functionality of the program can be found below, and a free demo version of the program can be downloaded in the Download section<\/h4>\n
\nIn the current semester in the Department of Building Constructions of the University of Technology and Life Sciences in Bydgoszcz, the IgentForm<\/strong> program will be used by students for modeling of steel towers used for assembly of mobile devices. The coordinator of the project exercise is Mr MSc. Jaros\u0142aw Gajewski. A short English-language video on modeling is available at\u00a0\u00a0https:\/\/youtu.be\/rbYPkQP4O9I<\/a><\/h4>\n
\n26.09.2017 at the Cracow University of Technology was presented and defended diploma thesis by Mrs. Marta T\u0142u\u015bcik entitled “Application of IgentForm program in the practice of parametric design and structural optimisation using BIM technology<\/span>“, led by Dr Eng. Jacek Magiera. Below is a brief outline of a selected piece of work connected with modeling of one of the towers of Absolute Towers complex in Canada.<\/span><\/h4>\nDownload<\/a><\/h2>\n<\/p>\n
\nATTENTION: Change of the name<\/strong><\/span><\/h3>\nWe inform, that on 30.05.2017 the company name has been changed from IntelForm to IgentForm (new domain www.igentform.com<\/span>)<\/span>
\nDuring the transitional period both old and new name may exist<\/h3>\n
\nFree educational version<\/span>
\nDetails in section Order the program<\/strong><\/h3>\n
\n\u00a0 NOVELTIES: Possibility to generate solids based on DXF \u00a0(29.06.2017)<\/span><\/h3>\nDetails in section User zone<\/strong><\/h3>\n
IgentForm <\/strong><\/span>\u2013 Modeling and Structural Analysis<\/h2>\n<\/li>\n<\/ol>\n\n- \n
Parametric modeling of any 3D shape, including complex roof structures, with the possibility to create surfaces based on structural deformations under any load.<\/h4>\n<\/li>\n
- \n
Analysis of linear and surface structures.<\/h4>\n<\/li>\n
- \n
Analysis of multi-story buildings using Loat TakeDown Method<\/h4>\n<\/li>\n<\/ul>\n\u2013 Floors calculated using the Influence Surface Method or the Finite Element Method (integrated solver).<\/h4>\n– Seismic analysis using the method of load distribution according to the stiffness of elements (RPS2011)<\/h4>\n\n- \n
Finite element analysis of structures (Autodesk Robot calculation engine) \u2013 available for Autodesk Robot users<\/h4>\n<\/li>\n
- \n
Inclusion of prestressing tendons in calculations (cable loads, prestressing losses, verification of code conditions)<\/h4>\n<\/li>\n
- \n
Pre-dimensioning of reinforced concrete structures<\/h4>\n<\/li>\n
- \n
Calculation of theoretical reinforcement areas<\/h4>\n<\/li>\n
- \n
Possibility to generate multiple structure variants and optimize them according to specified criteria (e.g., weight, cost)<\/h4>\n<\/li>\n
- \n
Possibility to export models to architectural programs<\/h4>\n<\/li>\n<\/ul>\n– Export in IFC format<\/h4>\n– Export in JSON format (Grasshopper\/Rhino, with the option of subsequent transfer to Revit via Rhino.Inside.Revit or Archicad via Archicad Live Connection)<\/h4>\n
____________________________________________________<\/p>\n
\n- \n
IgentDraw <\/strong><\/span>\u2013 Documentation of reinforced concrete structures<\/h2>\n<\/li>\n<\/ol>\n\n- \n
Parametric creation of reinforcement drawings (beams, columns, walls, slabs, foundations, and shafts in foundation slabs).<\/h4>\n<\/li>\n
- \n
Automatic generation of drawings, reinforcement schedules, and 3D reinforcement after modifying any parameter (e.g. reinforcement diameter, bar shape, hole position and others).<\/h4>\n<\/li>\n
- \n
Integration with the IgentForm model<\/h4>\n<\/li>\n<\/ul>\n– Automatic creation of reinforcement regions after model import<\/h4>\n– Possibility to automatically create reinforcement based on theoretical reinforcement areas calculated in IgentForm or manually entered in IgentDraw (columns, beams)<\/h4>\n– Possibility of importing and displaying theoretical crosses of reinforcement surfaces calculated in IgentForm (plates)<\/h4>\n\n- \n
Generation of documentation for prestressing tendons (drawings, specifications, 3D model).<\/h4>\n<\/li>\n
- \n
Export of 2D drawings in DXF format.<\/h4>\n<\/li>\n
- \n
Export of 3D reinforcement in IFC format.<\/h4>\n<\/li>\n
- \n
Possibility to work with prestressing tendons and typical reinforcement in a single project<\/h4>\n<\/li>\n<\/ul>\n
____________________________________________________<\/p>\n
\n- \n
IgentBeam <\/strong><\/span>\u2013 Multi-span Beam Calculator<\/h2>\n<\/li>\n<\/ol>\n\n- \n
Calculations of multi-span beams with the option of optimizing prestressing tendon trajectory.<\/h4>\n<\/li>\n
- \n
Connection to IgentForm for cable optimization.<\/h4>\n<\/li>\n<\/ul>\n
____________________________________________________<\/p>\n
BIM Integration<\/strong><\/span><\/h2>\n\n- \n
IFC export (structure model, 3D reinforcement, 3D prestressing cables)<\/h4>\n<\/li>\n
- \n
RTD export (Autodesk Robot)<\/h4>\n<\/li>\n
- \n
JSON export \u2192 Grasshopper \u2192 Rhino \/ Revit \/ Archicad.<\/h4>\n<\/li>\n
- \n
DXF import (file-based modeling)<\/h4>\n<\/li>\n
- \n
DXF export (documentation).<\/h4>\n<\/li>\n
- \n
Consistent geometry, common calculation platform and database.<\/h4>\n<\/li>\n<\/ul>\nWhy choose Igent Suite<\/span>?<\/strong><\/h2>\n\n- \n
A single environment for the entire process: modeling \u2192 analysis \u2192 documentation<\/h4>\n<\/li>\n
- \n
Connects the worlds of construction, architecture, and parametric modeling.<\/h4>\n<\/li>\n
- \n
Open data format enables easy integration with office design processes.<\/h4>\n<\/li>\n
- \n
Ultra-fast modeling of typical and advanced structures<\/h4>\n<\/li>\n
- \n
Modern internal architecture (C# programming language, parallel programming, shared source code).<\/h4>\n<\/li>\n<\/ul>\n\n
\nIgentForm<\/strong><\/span>\u00a0 – it is a unique program for parametric modeling of the structure. The <Solid construction> mode is intended for engineers as a tool for quickly creating advanced geometric forms, as well as for architects as a tool supporting work at the conceptual stage of the project. The <Building> mode enables modeling, calculations and pre-sizing of typical multi-story buildings.<\/h4>\nIn\u00a0IgentForm<\/strong>\u00a0structure model consists of one or more masses whose mutual position can be determined by means of appropriate parameters (eg. The position of one mass above another or cutting one mass to another).<\/h4>\nAt the level of a single mass parameterization is subject to, among others, contour and shape of the mass, the amount of floors and roof structure. Additionally, the program\u00a0IgentForm<\/strong>\u00a0introduces the concept of structural lines (by default these are all external contour lines with the possibility to add a line inside the contour), for which you can define the structural arrangement consisting of beams, columns, walls, trusses, etc.<\/h4>\nAfter each change of any parameter, model of a 3D structure is automatically regenerated and visualized in real time.<\/h4>\n
\nIgentDraw<\/span> – is a unique program for parametric creation of reinforcement drawings. In the current version modules of plates, walls and columns are available. A typical way of working is importing a DXF background, definition of reinforcement regions (with the possibility of automatic recognition of contours from a selected layer) and setting reinforcement parameters. Reinforcement is generated and drawings are created automatically when any parameter is changed. In the case of plates and walls, the program provides, among others automatic cutting of bars to openings, division of bars taking into account lap lengths, reinforcement at an angle or the possibility of generating edge reinforcement. Real-time regeneration of the entire model after each modification ensures consistency of created documentation both at the drawing and aggregate reinforcement table levels.<\/h4>\n<\/h2>\nIgentBeam<\/span><\/strong> is a parametric multi-span beam calculator that enables calculations using the finite element method. These calculations are performed automatically after change of any parameter. The program enables the definition of prestressing tendons, optimization of their curve and automatic generation of cable loads. It is also possible to export such generated loads to Autodesk Robot Structural Analysis program. A short film showing the possibilities of the program can be seen at https:\/\/youtu.be\/NZJQ_988YA0<\/a><\/h4>\n
\nIgentForm company also creates custom parametric software. Two programs have been created in this mode:
\nIgentGP –<\/strong> a program for creating documentation and 3D visualization for prestressed constructions in cooperation with GP-Projekt <\/h4>\nIgentPres<\/strong> – a program aimed at accelerating the implementation of the compression project in the field of BIM 3D documentation in cooperation with Warbud SA.<\/h4>\nAll programs can work in Polish, English and French.<\/h4>\n<\/section>\n
\nNews<\/strong><\/span><\/h2>\n
\n2025.09.10<\/h4>\nIgentForm is developing access to the latest technologies. The parametric structure modeler has been adapted to the BIMvision environment (comprehensive IFC file support) and is now available as a plug-in called IgentBIM. This functionality extends the BIMvision environment with editing capabilities. Intuitive parameterization allows you to quickly create advanced models, as well as various variants of the same structure, along with their evaluation according to various criteria. I encourage you to learn more about this innovative functionality at https:\/\/bimvision.eu<\/h4>\n2024.07.15<\/h4>\nIgentForm<\/strong> company has entered into cooperation with Robobat Afrique<\/strong> (www.robobatmaroc.com<\/a>), which has received exclusive rights to distribute IgentForm and IgentDraw programs in French-speaking markets. Details here<\/a><\/h4>\n2022.11.28<\/strong><\/h4>\nIgentDraw<\/span> program has been enhanced with the ability to create drawings for spread footings<\/h4>\n2022.11.25<\/strong><\/h4>\nThe latest version of IgentForm<\/span>\u00a0progrm has been approved as a tool to support the design process in conjunction with Autodesk Robot Structural Analysis and Autodesk Revit and is available in the online store Autodesk AppStore (https:\/\/apps.autodesk.com\/pl<\/a>)<\/h4>\n2022.11.10<\/strong><\/h4>\nAll IgentForm programs have been equipped with a digital signature<\/h4>\n2022.10.07<\/strong><\/h4>\nIgentForm software was presented during the international BATIMAT Construction Fair in Paris on 2022.10.03 – 2022.10.06<\/h4>\n\u00a02022.02.24<\/strong><\/h4>\nIgentBeam – parametric multi-span beam calculator<\/span><\/h3>\nThe IgentBeam program has been added to the offer, which enables the calculation of multi-span beams using the finite element method.<\/h4>\n2020.12.11<\/strong><\/h4>\nMany companies appreciate the benefits of using the BIM approach in design practice.<\/span> One of them is BUREAU D’ETUDES STRUCTURALIS based in Paris, which promotes and offers solutions based on this technology.<\/span> At https:\/\/structalis.fr<\/a><\/span> you can find, among others<\/span> a list of especially recommended plugins \/programs for Autodesk Revit, including IgentForm.<\/span><\/h4>\n2020.11.03<\/strong>
\nProgram IgentDraw<\/span> , in addition to the parametric creation of drawings of plates, walls and columns, has been enhanced with the possibility of creating drawings for beams. Thanks to this, it is possible to obtain complete drawing documentation for the most common reinforced concrete elements<\/h4>\n2020.09.08<\/strong><\/h4>\nProgram<\/span> IgentForm<\/span><\/span> has been approved as a design support tool in conjunction with Autodesk Robot Structural Analysis and Autodesk Revit and is available in the Autodesk AppStore online store\u00a0(https:\/\/apps.autodesk.com\/pl<\/a><\/span>)<\/strong><\/h4>\n\n
\n<\/p>\n
Thank you very much to everyone who visited our company stand during Budma 2020 Fair, which took place in Pozna\u0144 in February 2020.02.04 – 2020.02.07<\/h4>\n
<\/p>\n\nAttention\u00a0<\/strong>(06.12.2019) –\u00a0IgentDraw<\/strong>\u00a0– parametric creation of reinforcement drawings for columns\u00a0(description below)\u00a0<\/span><\/span><\/h4>\n
\n<\/section>\nIgentDraw – parametric creation of column reinforcement drawings<\/span><\/h3>\n06.12.2019<\/span> – In addition to the possibility of parametric creation of\u00a0plates and walls drawings, the IgentDraw program has been enhanced with the ability to create drawings for columns. Using a parametric approach, creating documentation can be several times faster than using traditional tools. The possibility of working on a DXF foundation, the option of automatic recognition of column cross-sections from a selected layer, and the mechanism of reinforcement generation by assigning appropriate longitudinal and transverse reinforcement patterns mean that in a few minutes documentation can be created even for a large structure. In addition, thanks to the unique real-time regeneration mechanism of the entire model after each modification, the program ensures consistency of created documentation at both the level of drawings and the\u00a0aggregate\u00a0reinforcement table, which is particularly important in case of subsequent changes in the design.<\/h4>\nPrestressed structures<\/span><\/strong><\/h3>\n30.11.2018<\/span>\u00a0– One of the forms of IgentForm’s activities is the creation of specialized software for the needs of construction and architecture, based on the latest IT technologies using, among others, parallel processing capabilities.<\/h4>\nThe company IgentForm has recently started cooperation with the company\u00a0\u00a0gp-projekt\u00a0<\/span>(http:\/\/www.gp-projekt.pl<\/a><\/span>),\u00a0specializing in the design of prestressed structures for building construction. On commission and in cooperation with gp-project<\/span>\u00a0an innovative program called IgentGP was created, which significantly accelerates the creation of project documentation, and one of its unique features is the ability to write generated 3D tendons in IFC format, which allows their use in projects made in BIM technology. The program allows the generation of tendons with a different number of strands with covers in all commonly used compression systems as well as the definition and generation of safety zones due to the potential drilling or punching in concrete beams.<\/h4>\n\u201eIncreasing competitiveness requires the actual implementation of innovative solutions that allow the delivery of modern and useful products to investors, contractors and architects. Implementation of this idea would not be possible without cooperation with IgentForm, which properly understood our need and creatively and patiently worked to achieve the intended goal. This is how we imagined good and flexible cooperation.\u201d<\/em><\/span><\/h4>\n<\/h4>\ngp-project<\/span> is a design studio providing services in the field of designing construction structures at every stage of the investment. The studio’s specialty is conceptual and optimization projects in which modern solutions and technologies are used, in particular monolithic compression. The company’s portfolio includes numerous facilities completed in Poland and abroad. More information about the company can be found at http:\/\/www.gp-projekt.pl<\/span><\/span><\/span><\/h4>\n
\nCompanies interested in creating a dedicated, high-quality and reliable software are asked to contact us at office@igentform.com<\/span><\/span><\/span><\/h4>\nATTENTION: Load TakeDown<\/strong><\/span><\/h4>\n15.06.2018 – In IgentForm, the next step was done to implement the calculation capabilities according to the Load TakeDown method. To the possibility of displaying the influence surfaces, the possibility of distributing loads from plates to elements directly supporting the plates\u00a0 and the possibility to export these loads to\u00a0 Autodesk Robot Structural Analysis program have been added. Details in the User Zone<\/span><\/h4>\n28\/03\/2018 – A new program called IgentPres<\/span> has been added to the offer. It was created in response to the needs of Warbud SA<\/span>, one of the largest construction companies in Poland (www.warbud.pl<\/span>). The software was to help speed up the implementation of the compression project in the field of BIM 3D documentation of the currently built office facility in Warsaw. At present, in the program, based on 2D workshop drawings, it is possible to recover geometry 3D of tendons, parameterize them (anchor types, number of strands, strength parameters, protection zones) and export 3D models of these tendons to IFC format<\/h4>\nATTENTION: Novelty<\/strong><\/span><\/h4>\nOn 16.11.2017 IgentDraw<\/strong><\/span> program was added to the offer designed for parametric creation of\u00a0 reinforcement drawings for plates. It was created in the same technology as the IgentForm program. It has the ability to work on DXF background. The final result is the ability to save the drawing and the summary reinforcement table in DXF format. A short description of the functionality of the program can be found below, and a free demo version of the program can be downloaded in the Download section<\/h4>\n
\nIn the current semester in the Department of Building Constructions of the University of Technology and Life Sciences in Bydgoszcz, the IgentForm<\/strong> program will be used by students for modeling of steel towers used for assembly of mobile devices. The coordinator of the project exercise is Mr MSc. Jaros\u0142aw Gajewski. A short English-language video on modeling is available at\u00a0\u00a0https:\/\/youtu.be\/rbYPkQP4O9I<\/a><\/h4>\n
\n26.09.2017 at the Cracow University of Technology was presented and defended diploma thesis by Mrs. Marta T\u0142u\u015bcik entitled “Application of IgentForm program in the practice of parametric design and structural optimisation using BIM technology<\/span>“, led by Dr Eng. Jacek Magiera. Below is a brief outline of a selected piece of work connected with modeling of one of the towers of Absolute Towers complex in Canada.<\/span><\/h4>\nDownload<\/a><\/h2>\n<\/p>\n
\nATTENTION: Change of the name<\/strong><\/span><\/h3>\nWe inform, that on 30.05.2017 the company name has been changed from IntelForm to IgentForm (new domain www.igentform.com<\/span>)<\/span>
\nDuring the transitional period both old and new name may exist<\/h3>\n
\nFree educational version<\/span>
\nDetails in section Order the program<\/strong><\/h3>\n
\n\u00a0 NOVELTIES: Possibility to generate solids based on DXF \u00a0(29.06.2017)<\/span><\/h3>\nDetails in section User zone<\/strong><\/h3>\n
Parametric modeling of any 3D shape, including complex roof structures, with the possibility to create surfaces based on structural deformations under any load.<\/h4>\n<\/li>\n
Analysis of linear and surface structures.<\/h4>\n<\/li>\n
Analysis of multi-story buildings using Loat TakeDown Method<\/h4>\n<\/li>\n<\/ul>\n\u2013 Floors calculated using the Influence Surface Method or the Finite Element Method (integrated solver).<\/h4>\n– Seismic analysis using the method of load distribution according to the stiffness of elements (RPS2011)<\/h4>\n\n- \n
Finite element analysis of structures (Autodesk Robot calculation engine) \u2013 available for Autodesk Robot users<\/h4>\n<\/li>\n
- \n
Inclusion of prestressing tendons in calculations (cable loads, prestressing losses, verification of code conditions)<\/h4>\n<\/li>\n
- \n
Pre-dimensioning of reinforced concrete structures<\/h4>\n<\/li>\n
- \n
Calculation of theoretical reinforcement areas<\/h4>\n<\/li>\n
- \n
Possibility to generate multiple structure variants and optimize them according to specified criteria (e.g., weight, cost)<\/h4>\n<\/li>\n
- \n
Possibility to export models to architectural programs<\/h4>\n<\/li>\n<\/ul>\n– Export in IFC format<\/h4>\n– Export in JSON format (Grasshopper\/Rhino, with the option of subsequent transfer to Revit via Rhino.Inside.Revit or Archicad via Archicad Live Connection)<\/h4>\n
____________________________________________________<\/p>\n
\n- \n
IgentDraw <\/strong><\/span>\u2013 Documentation of reinforced concrete structures<\/h2>\n<\/li>\n<\/ol>\n\n- \n
Parametric creation of reinforcement drawings (beams, columns, walls, slabs, foundations, and shafts in foundation slabs).<\/h4>\n<\/li>\n
- \n
Automatic generation of drawings, reinforcement schedules, and 3D reinforcement after modifying any parameter (e.g. reinforcement diameter, bar shape, hole position and others).<\/h4>\n<\/li>\n
- \n
Integration with the IgentForm model<\/h4>\n<\/li>\n<\/ul>\n– Automatic creation of reinforcement regions after model import<\/h4>\n– Possibility to automatically create reinforcement based on theoretical reinforcement areas calculated in IgentForm or manually entered in IgentDraw (columns, beams)<\/h4>\n– Possibility of importing and displaying theoretical crosses of reinforcement surfaces calculated in IgentForm (plates)<\/h4>\n\n- \n
Generation of documentation for prestressing tendons (drawings, specifications, 3D model).<\/h4>\n<\/li>\n
- \n
Export of 2D drawings in DXF format.<\/h4>\n<\/li>\n
- \n
Export of 3D reinforcement in IFC format.<\/h4>\n<\/li>\n
- \n
Possibility to work with prestressing tendons and typical reinforcement in a single project<\/h4>\n<\/li>\n<\/ul>\n
____________________________________________________<\/p>\n
\n- \n
IgentBeam <\/strong><\/span>\u2013 Multi-span Beam Calculator<\/h2>\n<\/li>\n<\/ol>\n\n- \n
Calculations of multi-span beams with the option of optimizing prestressing tendon trajectory.<\/h4>\n<\/li>\n
- \n
Connection to IgentForm for cable optimization.<\/h4>\n<\/li>\n<\/ul>\n
____________________________________________________<\/p>\n
BIM Integration<\/strong><\/span><\/h2>\n\n- \n
IFC export (structure model, 3D reinforcement, 3D prestressing cables)<\/h4>\n<\/li>\n
- \n
RTD export (Autodesk Robot)<\/h4>\n<\/li>\n
- \n
JSON export \u2192 Grasshopper \u2192 Rhino \/ Revit \/ Archicad.<\/h4>\n<\/li>\n
- \n
DXF import (file-based modeling)<\/h4>\n<\/li>\n
- \n
DXF export (documentation).<\/h4>\n<\/li>\n
- \n
Consistent geometry, common calculation platform and database.<\/h4>\n<\/li>\n<\/ul>\nWhy choose Igent Suite<\/span>?<\/strong><\/h2>\n\n- \n
A single environment for the entire process: modeling \u2192 analysis \u2192 documentation<\/h4>\n<\/li>\n
- \n
Connects the worlds of construction, architecture, and parametric modeling.<\/h4>\n<\/li>\n
- \n
Open data format enables easy integration with office design processes.<\/h4>\n<\/li>\n
- \n
Ultra-fast modeling of typical and advanced structures<\/h4>\n<\/li>\n
- \n
Modern internal architecture (C# programming language, parallel programming, shared source code).<\/h4>\n<\/li>\n<\/ul>\n\n
\nIgentForm<\/strong><\/span>\u00a0 – it is a unique program for parametric modeling of the structure. The <Solid construction> mode is intended for engineers as a tool for quickly creating advanced geometric forms, as well as for architects as a tool supporting work at the conceptual stage of the project. The <Building> mode enables modeling, calculations and pre-sizing of typical multi-story buildings.<\/h4>\nIn\u00a0IgentForm<\/strong>\u00a0structure model consists of one or more masses whose mutual position can be determined by means of appropriate parameters (eg. The position of one mass above another or cutting one mass to another).<\/h4>\nAt the level of a single mass parameterization is subject to, among others, contour and shape of the mass, the amount of floors and roof structure. Additionally, the program\u00a0IgentForm<\/strong>\u00a0introduces the concept of structural lines (by default these are all external contour lines with the possibility to add a line inside the contour), for which you can define the structural arrangement consisting of beams, columns, walls, trusses, etc.<\/h4>\nAfter each change of any parameter, model of a 3D structure is automatically regenerated and visualized in real time.<\/h4>\n
\nIgentDraw<\/span> – is a unique program for parametric creation of reinforcement drawings. In the current version modules of plates, walls and columns are available. A typical way of working is importing a DXF background, definition of reinforcement regions (with the possibility of automatic recognition of contours from a selected layer) and setting reinforcement parameters. Reinforcement is generated and drawings are created automatically when any parameter is changed. In the case of plates and walls, the program provides, among others automatic cutting of bars to openings, division of bars taking into account lap lengths, reinforcement at an angle or the possibility of generating edge reinforcement. Real-time regeneration of the entire model after each modification ensures consistency of created documentation both at the drawing and aggregate reinforcement table levels.<\/h4>\n<\/h2>\nIgentBeam<\/span><\/strong> is a parametric multi-span beam calculator that enables calculations using the finite element method. These calculations are performed automatically after change of any parameter. The program enables the definition of prestressing tendons, optimization of their curve and automatic generation of cable loads. It is also possible to export such generated loads to Autodesk Robot Structural Analysis program. A short film showing the possibilities of the program can be seen at https:\/\/youtu.be\/NZJQ_988YA0<\/a><\/h4>\n
\nIgentForm company also creates custom parametric software. Two programs have been created in this mode:
\nIgentGP –<\/strong> a program for creating documentation and 3D visualization for prestressed constructions in cooperation with GP-Projekt <\/h4>\nIgentPres<\/strong> – a program aimed at accelerating the implementation of the compression project in the field of BIM 3D documentation in cooperation with Warbud SA.<\/h4>\nAll programs can work in Polish, English and French.<\/h4>\n<\/section>\n
\nNews<\/strong><\/span><\/h2>\n
\n2025.09.10<\/h4>\nIgentForm is developing access to the latest technologies. The parametric structure modeler has been adapted to the BIMvision environment (comprehensive IFC file support) and is now available as a plug-in called IgentBIM. This functionality extends the BIMvision environment with editing capabilities. Intuitive parameterization allows you to quickly create advanced models, as well as various variants of the same structure, along with their evaluation according to various criteria. I encourage you to learn more about this innovative functionality at https:\/\/bimvision.eu<\/h4>\n2024.07.15<\/h4>\nIgentForm<\/strong> company has entered into cooperation with Robobat Afrique<\/strong> (www.robobatmaroc.com<\/a>), which has received exclusive rights to distribute IgentForm and IgentDraw programs in French-speaking markets. Details here<\/a><\/h4>\n2022.11.28<\/strong><\/h4>\nIgentDraw<\/span> program has been enhanced with the ability to create drawings for spread footings<\/h4>\n2022.11.25<\/strong><\/h4>\nThe latest version of IgentForm<\/span>\u00a0progrm has been approved as a tool to support the design process in conjunction with Autodesk Robot Structural Analysis and Autodesk Revit and is available in the online store Autodesk AppStore (https:\/\/apps.autodesk.com\/pl<\/a>)<\/h4>\n2022.11.10<\/strong><\/h4>\nAll IgentForm programs have been equipped with a digital signature<\/h4>\n2022.10.07<\/strong><\/h4>\nIgentForm software was presented during the international BATIMAT Construction Fair in Paris on 2022.10.03 – 2022.10.06<\/h4>\n\u00a02022.02.24<\/strong><\/h4>\nIgentBeam – parametric multi-span beam calculator<\/span><\/h3>\nThe IgentBeam program has been added to the offer, which enables the calculation of multi-span beams using the finite element method.<\/h4>\n2020.12.11<\/strong><\/h4>\nMany companies appreciate the benefits of using the BIM approach in design practice.<\/span> One of them is BUREAU D’ETUDES STRUCTURALIS based in Paris, which promotes and offers solutions based on this technology.<\/span> At https:\/\/structalis.fr<\/a><\/span> you can find, among others<\/span> a list of especially recommended plugins \/programs for Autodesk Revit, including IgentForm.<\/span><\/h4>\n2020.11.03<\/strong>
\nProgram IgentDraw<\/span> , in addition to the parametric creation of drawings of plates, walls and columns, has been enhanced with the possibility of creating drawings for beams. Thanks to this, it is possible to obtain complete drawing documentation for the most common reinforced concrete elements<\/h4>\n2020.09.08<\/strong><\/h4>\nProgram<\/span> IgentForm<\/span><\/span> has been approved as a design support tool in conjunction with Autodesk Robot Structural Analysis and Autodesk Revit and is available in the Autodesk AppStore online store\u00a0(https:\/\/apps.autodesk.com\/pl<\/a><\/span>)<\/strong><\/h4>\n\n
\n<\/p>\n
Thank you very much to everyone who visited our company stand during Budma 2020 Fair, which took place in Pozna\u0144 in February 2020.02.04 – 2020.02.07<\/h4>\n
<\/p>\n\nAttention\u00a0<\/strong>(06.12.2019) –\u00a0IgentDraw<\/strong>\u00a0– parametric creation of reinforcement drawings for columns\u00a0(description below)\u00a0<\/span><\/span><\/h4>\n
\n<\/section>\nIgentDraw – parametric creation of column reinforcement drawings<\/span><\/h3>\n06.12.2019<\/span> – In addition to the possibility of parametric creation of\u00a0plates and walls drawings, the IgentDraw program has been enhanced with the ability to create drawings for columns. Using a parametric approach, creating documentation can be several times faster than using traditional tools. The possibility of working on a DXF foundation, the option of automatic recognition of column cross-sections from a selected layer, and the mechanism of reinforcement generation by assigning appropriate longitudinal and transverse reinforcement patterns mean that in a few minutes documentation can be created even for a large structure. In addition, thanks to the unique real-time regeneration mechanism of the entire model after each modification, the program ensures consistency of created documentation at both the level of drawings and the\u00a0aggregate\u00a0reinforcement table, which is particularly important in case of subsequent changes in the design.<\/h4>\nPrestressed structures<\/span><\/strong><\/h3>\n30.11.2018<\/span>\u00a0– One of the forms of IgentForm’s activities is the creation of specialized software for the needs of construction and architecture, based on the latest IT technologies using, among others, parallel processing capabilities.<\/h4>\nThe company IgentForm has recently started cooperation with the company\u00a0\u00a0gp-projekt\u00a0<\/span>(http:\/\/www.gp-projekt.pl<\/a><\/span>),\u00a0specializing in the design of prestressed structures for building construction. On commission and in cooperation with gp-project<\/span>\u00a0an innovative program called IgentGP was created, which significantly accelerates the creation of project documentation, and one of its unique features is the ability to write generated 3D tendons in IFC format, which allows their use in projects made in BIM technology. The program allows the generation of tendons with a different number of strands with covers in all commonly used compression systems as well as the definition and generation of safety zones due to the potential drilling or punching in concrete beams.<\/h4>\n\u201eIncreasing competitiveness requires the actual implementation of innovative solutions that allow the delivery of modern and useful products to investors, contractors and architects. Implementation of this idea would not be possible without cooperation with IgentForm, which properly understood our need and creatively and patiently worked to achieve the intended goal. This is how we imagined good and flexible cooperation.\u201d<\/em><\/span><\/h4>\n<\/h4>\ngp-project<\/span> is a design studio providing services in the field of designing construction structures at every stage of the investment. The studio’s specialty is conceptual and optimization projects in which modern solutions and technologies are used, in particular monolithic compression. The company’s portfolio includes numerous facilities completed in Poland and abroad. More information about the company can be found at http:\/\/www.gp-projekt.pl<\/span><\/span><\/span><\/h4>\n
\nCompanies interested in creating a dedicated, high-quality and reliable software are asked to contact us at office@igentform.com<\/span><\/span><\/span><\/h4>\nATTENTION: Load TakeDown<\/strong><\/span><\/h4>\n15.06.2018 – In IgentForm, the next step was done to implement the calculation capabilities according to the Load TakeDown method. To the possibility of displaying the influence surfaces, the possibility of distributing loads from plates to elements directly supporting the plates\u00a0 and the possibility to export these loads to\u00a0 Autodesk Robot Structural Analysis program have been added. Details in the User Zone<\/span><\/h4>\n28\/03\/2018 – A new program called IgentPres<\/span> has been added to the offer. It was created in response to the needs of Warbud SA<\/span>, one of the largest construction companies in Poland (www.warbud.pl<\/span>). The software was to help speed up the implementation of the compression project in the field of BIM 3D documentation of the currently built office facility in Warsaw. At present, in the program, based on 2D workshop drawings, it is possible to recover geometry 3D of tendons, parameterize them (anchor types, number of strands, strength parameters, protection zones) and export 3D models of these tendons to IFC format<\/h4>\nATTENTION: Novelty<\/strong><\/span><\/h4>\nOn 16.11.2017 IgentDraw<\/strong><\/span> program was added to the offer designed for parametric creation of\u00a0 reinforcement drawings for plates. It was created in the same technology as the IgentForm program. It has the ability to work on DXF background. The final result is the ability to save the drawing and the summary reinforcement table in DXF format. A short description of the functionality of the program can be found below, and a free demo version of the program can be downloaded in the Download section<\/h4>\n
\nIn the current semester in the Department of Building Constructions of the University of Technology and Life Sciences in Bydgoszcz, the IgentForm<\/strong> program will be used by students for modeling of steel towers used for assembly of mobile devices. The coordinator of the project exercise is Mr MSc. Jaros\u0142aw Gajewski. A short English-language video on modeling is available at\u00a0\u00a0https:\/\/youtu.be\/rbYPkQP4O9I<\/a><\/h4>\n
\n26.09.2017 at the Cracow University of Technology was presented and defended diploma thesis by Mrs. Marta T\u0142u\u015bcik entitled “Application of IgentForm program in the practice of parametric design and structural optimisation using BIM technology<\/span>“, led by Dr Eng. Jacek Magiera. Below is a brief outline of a selected piece of work connected with modeling of one of the towers of Absolute Towers complex in Canada.<\/span><\/h4>\nDownload<\/a><\/h2>\n<\/p>\n
\nATTENTION: Change of the name<\/strong><\/span><\/h3>\nWe inform, that on 30.05.2017 the company name has been changed from IntelForm to IgentForm (new domain www.igentform.com<\/span>)<\/span>
\nDuring the transitional period both old and new name may exist<\/h3>\n
\nFree educational version<\/span>
\nDetails in section Order the program<\/strong><\/h3>\n
\n\u00a0 NOVELTIES: Possibility to generate solids based on DXF \u00a0(29.06.2017)<\/span><\/h3>\nDetails in section User zone<\/strong><\/h3>\n
– Seismic analysis using the method of load distribution according to the stiffness of elements (RPS2011)<\/h4>\n\n- \n
Finite element analysis of structures (Autodesk Robot calculation engine) \u2013 available for Autodesk Robot users<\/h4>\n<\/li>\n
- \n
Inclusion of prestressing tendons in calculations (cable loads, prestressing losses, verification of code conditions)<\/h4>\n<\/li>\n
- \n
Pre-dimensioning of reinforced concrete structures<\/h4>\n<\/li>\n
- \n
Calculation of theoretical reinforcement areas<\/h4>\n<\/li>\n
- \n
Possibility to generate multiple structure variants and optimize them according to specified criteria (e.g., weight, cost)<\/h4>\n<\/li>\n
- \n
Possibility to export models to architectural programs<\/h4>\n<\/li>\n<\/ul>\n– Export in IFC format<\/h4>\n– Export in JSON format (Grasshopper\/Rhino, with the option of subsequent transfer to Revit via Rhino.Inside.Revit or Archicad via Archicad Live Connection)<\/h4>\n
____________________________________________________<\/p>\n
\n- \n
IgentDraw <\/strong><\/span>\u2013 Documentation of reinforced concrete structures<\/h2>\n<\/li>\n<\/ol>\n\n- \n
Parametric creation of reinforcement drawings (beams, columns, walls, slabs, foundations, and shafts in foundation slabs).<\/h4>\n<\/li>\n
- \n
Automatic generation of drawings, reinforcement schedules, and 3D reinforcement after modifying any parameter (e.g. reinforcement diameter, bar shape, hole position and others).<\/h4>\n<\/li>\n
- \n
Integration with the IgentForm model<\/h4>\n<\/li>\n<\/ul>\n– Automatic creation of reinforcement regions after model import<\/h4>\n– Possibility to automatically create reinforcement based on theoretical reinforcement areas calculated in IgentForm or manually entered in IgentDraw (columns, beams)<\/h4>\n– Possibility of importing and displaying theoretical crosses of reinforcement surfaces calculated in IgentForm (plates)<\/h4>\n\n- \n
Generation of documentation for prestressing tendons (drawings, specifications, 3D model).<\/h4>\n<\/li>\n
- \n
Export of 2D drawings in DXF format.<\/h4>\n<\/li>\n
- \n
Export of 3D reinforcement in IFC format.<\/h4>\n<\/li>\n
- \n
Possibility to work with prestressing tendons and typical reinforcement in a single project<\/h4>\n<\/li>\n<\/ul>\n
____________________________________________________<\/p>\n
\n- \n
IgentBeam <\/strong><\/span>\u2013 Multi-span Beam Calculator<\/h2>\n<\/li>\n<\/ol>\n\n- \n
Calculations of multi-span beams with the option of optimizing prestressing tendon trajectory.<\/h4>\n<\/li>\n
- \n
Connection to IgentForm for cable optimization.<\/h4>\n<\/li>\n<\/ul>\n
____________________________________________________<\/p>\n
BIM Integration<\/strong><\/span><\/h2>\n\n- \n
IFC export (structure model, 3D reinforcement, 3D prestressing cables)<\/h4>\n<\/li>\n
- \n
RTD export (Autodesk Robot)<\/h4>\n<\/li>\n
- \n
JSON export \u2192 Grasshopper \u2192 Rhino \/ Revit \/ Archicad.<\/h4>\n<\/li>\n
- \n
DXF import (file-based modeling)<\/h4>\n<\/li>\n
- \n
DXF export (documentation).<\/h4>\n<\/li>\n
- \n
Consistent geometry, common calculation platform and database.<\/h4>\n<\/li>\n<\/ul>\nWhy choose Igent Suite<\/span>?<\/strong><\/h2>\n\n- \n
A single environment for the entire process: modeling \u2192 analysis \u2192 documentation<\/h4>\n<\/li>\n
- \n
Connects the worlds of construction, architecture, and parametric modeling.<\/h4>\n<\/li>\n
- \n
Open data format enables easy integration with office design processes.<\/h4>\n<\/li>\n
- \n
Ultra-fast modeling of typical and advanced structures<\/h4>\n<\/li>\n
- \n
Modern internal architecture (C# programming language, parallel programming, shared source code).<\/h4>\n<\/li>\n<\/ul>\n\n
\nIgentForm<\/strong><\/span>\u00a0 – it is a unique program for parametric modeling of the structure. The <Solid construction> mode is intended for engineers as a tool for quickly creating advanced geometric forms, as well as for architects as a tool supporting work at the conceptual stage of the project. The <Building> mode enables modeling, calculations and pre-sizing of typical multi-story buildings.<\/h4>\nIn\u00a0IgentForm<\/strong>\u00a0structure model consists of one or more masses whose mutual position can be determined by means of appropriate parameters (eg. The position of one mass above another or cutting one mass to another).<\/h4>\nAt the level of a single mass parameterization is subject to, among others, contour and shape of the mass, the amount of floors and roof structure. Additionally, the program\u00a0IgentForm<\/strong>\u00a0introduces the concept of structural lines (by default these are all external contour lines with the possibility to add a line inside the contour), for which you can define the structural arrangement consisting of beams, columns, walls, trusses, etc.<\/h4>\nAfter each change of any parameter, model of a 3D structure is automatically regenerated and visualized in real time.<\/h4>\n
\nIgentDraw<\/span> – is a unique program for parametric creation of reinforcement drawings. In the current version modules of plates, walls and columns are available. A typical way of working is importing a DXF background, definition of reinforcement regions (with the possibility of automatic recognition of contours from a selected layer) and setting reinforcement parameters. Reinforcement is generated and drawings are created automatically when any parameter is changed. In the case of plates and walls, the program provides, among others automatic cutting of bars to openings, division of bars taking into account lap lengths, reinforcement at an angle or the possibility of generating edge reinforcement. Real-time regeneration of the entire model after each modification ensures consistency of created documentation both at the drawing and aggregate reinforcement table levels.<\/h4>\n<\/h2>\nIgentBeam<\/span><\/strong> is a parametric multi-span beam calculator that enables calculations using the finite element method. These calculations are performed automatically after change of any parameter. The program enables the definition of prestressing tendons, optimization of their curve and automatic generation of cable loads. It is also possible to export such generated loads to Autodesk Robot Structural Analysis program. A short film showing the possibilities of the program can be seen at https:\/\/youtu.be\/NZJQ_988YA0<\/a><\/h4>\n
\nIgentForm company also creates custom parametric software. Two programs have been created in this mode:
\nIgentGP –<\/strong> a program for creating documentation and 3D visualization for prestressed constructions in cooperation with GP-Projekt <\/h4>\nIgentPres<\/strong> – a program aimed at accelerating the implementation of the compression project in the field of BIM 3D documentation in cooperation with Warbud SA.<\/h4>\nAll programs can work in Polish, English and French.<\/h4>\n<\/section>\n
\nNews<\/strong><\/span><\/h2>\n
\n2025.09.10<\/h4>\nIgentForm is developing access to the latest technologies. The parametric structure modeler has been adapted to the BIMvision environment (comprehensive IFC file support) and is now available as a plug-in called IgentBIM. This functionality extends the BIMvision environment with editing capabilities. Intuitive parameterization allows you to quickly create advanced models, as well as various variants of the same structure, along with their evaluation according to various criteria. I encourage you to learn more about this innovative functionality at https:\/\/bimvision.eu<\/h4>\n2024.07.15<\/h4>\nIgentForm<\/strong> company has entered into cooperation with Robobat Afrique<\/strong> (www.robobatmaroc.com<\/a>), which has received exclusive rights to distribute IgentForm and IgentDraw programs in French-speaking markets. Details here<\/a><\/h4>\n2022.11.28<\/strong><\/h4>\nIgentDraw<\/span> program has been enhanced with the ability to create drawings for spread footings<\/h4>\n2022.11.25<\/strong><\/h4>\nThe latest version of IgentForm<\/span>\u00a0progrm has been approved as a tool to support the design process in conjunction with Autodesk Robot Structural Analysis and Autodesk Revit and is available in the online store Autodesk AppStore (https:\/\/apps.autodesk.com\/pl<\/a>)<\/h4>\n2022.11.10<\/strong><\/h4>\nAll IgentForm programs have been equipped with a digital signature<\/h4>\n2022.10.07<\/strong><\/h4>\nIgentForm software was presented during the international BATIMAT Construction Fair in Paris on 2022.10.03 – 2022.10.06<\/h4>\n\u00a02022.02.24<\/strong><\/h4>\nIgentBeam – parametric multi-span beam calculator<\/span><\/h3>\nThe IgentBeam program has been added to the offer, which enables the calculation of multi-span beams using the finite element method.<\/h4>\n2020.12.11<\/strong><\/h4>\nMany companies appreciate the benefits of using the BIM approach in design practice.<\/span> One of them is BUREAU D’ETUDES STRUCTURALIS based in Paris, which promotes and offers solutions based on this technology.<\/span> At https:\/\/structalis.fr<\/a><\/span> you can find, among others<\/span> a list of especially recommended plugins \/programs for Autodesk Revit, including IgentForm.<\/span><\/h4>\n2020.11.03<\/strong>
\nProgram IgentDraw<\/span> , in addition to the parametric creation of drawings of plates, walls and columns, has been enhanced with the possibility of creating drawings for beams. Thanks to this, it is possible to obtain complete drawing documentation for the most common reinforced concrete elements<\/h4>\n2020.09.08<\/strong><\/h4>\nProgram<\/span> IgentForm<\/span><\/span> has been approved as a design support tool in conjunction with Autodesk Robot Structural Analysis and Autodesk Revit and is available in the Autodesk AppStore online store\u00a0(https:\/\/apps.autodesk.com\/pl<\/a><\/span>)<\/strong><\/h4>\n\n
\n<\/p>\n
Thank you very much to everyone who visited our company stand during Budma 2020 Fair, which took place in Pozna\u0144 in February 2020.02.04 – 2020.02.07<\/h4>\n
<\/p>\n\nAttention\u00a0<\/strong>(06.12.2019) –\u00a0IgentDraw<\/strong>\u00a0– parametric creation of reinforcement drawings for columns\u00a0(description below)\u00a0<\/span><\/span><\/h4>\n
\n<\/section>\nIgentDraw – parametric creation of column reinforcement drawings<\/span><\/h3>\n06.12.2019<\/span> – In addition to the possibility of parametric creation of\u00a0plates and walls drawings, the IgentDraw program has been enhanced with the ability to create drawings for columns. Using a parametric approach, creating documentation can be several times faster than using traditional tools. The possibility of working on a DXF foundation, the option of automatic recognition of column cross-sections from a selected layer, and the mechanism of reinforcement generation by assigning appropriate longitudinal and transverse reinforcement patterns mean that in a few minutes documentation can be created even for a large structure. In addition, thanks to the unique real-time regeneration mechanism of the entire model after each modification, the program ensures consistency of created documentation at both the level of drawings and the\u00a0aggregate\u00a0reinforcement table, which is particularly important in case of subsequent changes in the design.<\/h4>\nPrestressed structures<\/span><\/strong><\/h3>\n30.11.2018<\/span>\u00a0– One of the forms of IgentForm’s activities is the creation of specialized software for the needs of construction and architecture, based on the latest IT technologies using, among others, parallel processing capabilities.<\/h4>\nThe company IgentForm has recently started cooperation with the company\u00a0\u00a0gp-projekt\u00a0<\/span>(http:\/\/www.gp-projekt.pl<\/a><\/span>),\u00a0specializing in the design of prestressed structures for building construction. On commission and in cooperation with gp-project<\/span>\u00a0an innovative program called IgentGP was created, which significantly accelerates the creation of project documentation, and one of its unique features is the ability to write generated 3D tendons in IFC format, which allows their use in projects made in BIM technology. The program allows the generation of tendons with a different number of strands with covers in all commonly used compression systems as well as the definition and generation of safety zones due to the potential drilling or punching in concrete beams.<\/h4>\n\u201eIncreasing competitiveness requires the actual implementation of innovative solutions that allow the delivery of modern and useful products to investors, contractors and architects. Implementation of this idea would not be possible without cooperation with IgentForm, which properly understood our need and creatively and patiently worked to achieve the intended goal. This is how we imagined good and flexible cooperation.\u201d<\/em><\/span><\/h4>\n<\/h4>\ngp-project<\/span> is a design studio providing services in the field of designing construction structures at every stage of the investment. The studio’s specialty is conceptual and optimization projects in which modern solutions and technologies are used, in particular monolithic compression. The company’s portfolio includes numerous facilities completed in Poland and abroad. More information about the company can be found at http:\/\/www.gp-projekt.pl<\/span><\/span><\/span><\/h4>\n
\nCompanies interested in creating a dedicated, high-quality and reliable software are asked to contact us at office@igentform.com<\/span><\/span><\/span><\/h4>\nATTENTION: Load TakeDown<\/strong><\/span><\/h4>\n15.06.2018 – In IgentForm, the next step was done to implement the calculation capabilities according to the Load TakeDown method. To the possibility of displaying the influence surfaces, the possibility of distributing loads from plates to elements directly supporting the plates\u00a0 and the possibility to export these loads to\u00a0 Autodesk Robot Structural Analysis program have been added. Details in the User Zone<\/span><\/h4>\n28\/03\/2018 – A new program called IgentPres<\/span> has been added to the offer. It was created in response to the needs of Warbud SA<\/span>, one of the largest construction companies in Poland (www.warbud.pl<\/span>). The software was to help speed up the implementation of the compression project in the field of BIM 3D documentation of the currently built office facility in Warsaw. At present, in the program, based on 2D workshop drawings, it is possible to recover geometry 3D of tendons, parameterize them (anchor types, number of strands, strength parameters, protection zones) and export 3D models of these tendons to IFC format<\/h4>\nATTENTION: Novelty<\/strong><\/span><\/h4>\nOn 16.11.2017 IgentDraw<\/strong><\/span> program was added to the offer designed for parametric creation of\u00a0 reinforcement drawings for plates. It was created in the same technology as the IgentForm program. It has the ability to work on DXF background. The final result is the ability to save the drawing and the summary reinforcement table in DXF format. A short description of the functionality of the program can be found below, and a free demo version of the program can be downloaded in the Download section<\/h4>\n
\nIn the current semester in the Department of Building Constructions of the University of Technology and Life Sciences in Bydgoszcz, the IgentForm<\/strong> program will be used by students for modeling of steel towers used for assembly of mobile devices. The coordinator of the project exercise is Mr MSc. Jaros\u0142aw Gajewski. A short English-language video on modeling is available at\u00a0\u00a0https:\/\/youtu.be\/rbYPkQP4O9I<\/a><\/h4>\n
\n26.09.2017 at the Cracow University of Technology was presented and defended diploma thesis by Mrs. Marta T\u0142u\u015bcik entitled “Application of IgentForm program in the practice of parametric design and structural optimisation using BIM technology<\/span>“, led by Dr Eng. Jacek Magiera. Below is a brief outline of a selected piece of work connected with modeling of one of the towers of Absolute Towers complex in Canada.<\/span><\/h4>\nDownload<\/a><\/h2>\n<\/p>\n
\nATTENTION: Change of the name<\/strong><\/span><\/h3>\nWe inform, that on 30.05.2017 the company name has been changed from IntelForm to IgentForm (new domain www.igentform.com<\/span>)<\/span>
\nDuring the transitional period both old and new name may exist<\/h3>\n
\nFree educational version<\/span>
\nDetails in section Order the program<\/strong><\/h3>\n
\n\u00a0 NOVELTIES: Possibility to generate solids based on DXF \u00a0(29.06.2017)<\/span><\/h3>\nDetails in section User zone<\/strong><\/h3>\n
Finite element analysis of structures (Autodesk Robot calculation engine) \u2013 available for Autodesk Robot users<\/h4>\n<\/li>\n
Inclusion of prestressing tendons in calculations (cable loads, prestressing losses, verification of code conditions)<\/h4>\n<\/li>\n
Pre-dimensioning of reinforced concrete structures<\/h4>\n<\/li>\n
Calculation of theoretical reinforcement areas<\/h4>\n<\/li>\n
Possibility to generate multiple structure variants and optimize them according to specified criteria (e.g., weight, cost)<\/h4>\n<\/li>\n
Possibility to export models to architectural programs<\/h4>\n<\/li>\n<\/ul>\n– Export in IFC format<\/h4>\n– Export in JSON format (Grasshopper\/Rhino, with the option of subsequent transfer to Revit via Rhino.Inside.Revit or Archicad via Archicad Live Connection)<\/h4>\n
– Export in JSON format (Grasshopper\/Rhino, with the option of subsequent transfer to Revit via Rhino.Inside.Revit or Archicad via Archicad Live Connection)<\/h4>\n
____________________________________________________<\/p>\n
- \n
- \n
IgentDraw <\/strong><\/span>\u2013 Documentation of reinforced concrete structures<\/h2>\n<\/li>\n<\/ol>\n
- \n
- \n
Parametric creation of reinforcement drawings (beams, columns, walls, slabs, foundations, and shafts in foundation slabs).<\/h4>\n<\/li>\n
- \n
Automatic generation of drawings, reinforcement schedules, and 3D reinforcement after modifying any parameter (e.g. reinforcement diameter, bar shape, hole position and others).<\/h4>\n<\/li>\n
- \n
Integration with the IgentForm model<\/h4>\n<\/li>\n<\/ul>\n
– Automatic creation of reinforcement regions after model import<\/h4>\n
– Possibility to automatically create reinforcement based on theoretical reinforcement areas calculated in IgentForm or manually entered in IgentDraw (columns, beams)<\/h4>\n
– Possibility of importing and displaying theoretical crosses of reinforcement surfaces calculated in IgentForm (plates)<\/h4>\n
- \n
- \n
Generation of documentation for prestressing tendons (drawings, specifications, 3D model).<\/h4>\n<\/li>\n
- \n
Export of 2D drawings in DXF format.<\/h4>\n<\/li>\n
- \n
Export of 3D reinforcement in IFC format.<\/h4>\n<\/li>\n
- \n
Possibility to work with prestressing tendons and typical reinforcement in a single project<\/h4>\n<\/li>\n<\/ul>\n
____________________________________________________<\/p>\n
- \n
- \n
IgentBeam <\/strong><\/span>\u2013 Multi-span Beam Calculator<\/h2>\n<\/li>\n<\/ol>\n
- \n
- \n
Calculations of multi-span beams with the option of optimizing prestressing tendon trajectory.<\/h4>\n<\/li>\n
- \n
Connection to IgentForm for cable optimization.<\/h4>\n<\/li>\n<\/ul>\n
____________________________________________________<\/p>\n
BIM Integration<\/strong><\/span><\/h2>\n
- \n
- \n
IFC export (structure model, 3D reinforcement, 3D prestressing cables)<\/h4>\n<\/li>\n
- \n
RTD export (Autodesk Robot)<\/h4>\n<\/li>\n
- \n
JSON export \u2192 Grasshopper \u2192 Rhino \/ Revit \/ Archicad.<\/h4>\n<\/li>\n
- \n
DXF import (file-based modeling)<\/h4>\n<\/li>\n
- \n
DXF export (documentation).<\/h4>\n<\/li>\n
- \n
Consistent geometry, common calculation platform and database.<\/h4>\n<\/li>\n<\/ul>\n
Why choose Igent Suite<\/span>?<\/strong><\/h2>\n
- \n
- \n
A single environment for the entire process: modeling \u2192 analysis \u2192 documentation<\/h4>\n<\/li>\n
- \n
Connects the worlds of construction, architecture, and parametric modeling.<\/h4>\n<\/li>\n
- \n
Open data format enables easy integration with office design processes.<\/h4>\n<\/li>\n
- \n
Ultra-fast modeling of typical and advanced structures<\/h4>\n<\/li>\n
- \n
Modern internal architecture (C# programming language, parallel programming, shared source code).<\/h4>\n<\/li>\n<\/ul>\n
\n
\nIgentForm<\/strong><\/span>\u00a0 – it is a unique program for parametric modeling of the structure. The <Solid construction> mode is intended for engineers as a tool for quickly creating advanced geometric forms, as well as for architects as a tool supporting work at the conceptual stage of the project. The <Building> mode enables modeling, calculations and pre-sizing of typical multi-story buildings.<\/h4>\nIn\u00a0IgentForm<\/strong>\u00a0structure model consists of one or more masses whose mutual position can be determined by means of appropriate parameters (eg. The position of one mass above another or cutting one mass to another).<\/h4>\n
At the level of a single mass parameterization is subject to, among others, contour and shape of the mass, the amount of floors and roof structure. Additionally, the program\u00a0IgentForm<\/strong>\u00a0introduces the concept of structural lines (by default these are all external contour lines with the possibility to add a line inside the contour), for which you can define the structural arrangement consisting of beams, columns, walls, trusses, etc.<\/h4>\n
After each change of any parameter, model of a 3D structure is automatically regenerated and visualized in real time.<\/h4>\n
\nIgentDraw<\/span> – is a unique program for parametric creation of reinforcement drawings. In the current version modules of plates, walls and columns are available. A typical way of working is importing a DXF background, definition of reinforcement regions (with the possibility of automatic recognition of contours from a selected layer) and setting reinforcement parameters. Reinforcement is generated and drawings are created automatically when any parameter is changed. In the case of plates and walls, the program provides, among others automatic cutting of bars to openings, division of bars taking into account lap lengths, reinforcement at an angle or the possibility of generating edge reinforcement. Real-time regeneration of the entire model after each modification ensures consistency of created documentation both at the drawing and aggregate reinforcement table levels.<\/h4>\n
<\/h2>\n
IgentBeam<\/span><\/strong> is a parametric multi-span beam calculator that enables calculations using the finite element method. These calculations are performed automatically after change of any parameter. The program enables the definition of prestressing tendons, optimization of their curve and automatic generation of cable loads. It is also possible to export such generated loads to Autodesk Robot Structural Analysis program. A short film showing the possibilities of the program can be seen at https:\/\/youtu.be\/NZJQ_988YA0<\/a><\/h4>\n
\nIgentForm company also creates custom parametric software. Two programs have been created in this mode:
\nIgentGP –<\/strong> a program for creating documentation and 3D visualization for prestressed constructions in cooperation with GP-Projekt<\/h4>\nIgentPres<\/strong> – a program aimed at accelerating the implementation of the compression project in the field of BIM 3D documentation in cooperation with Warbud SA.<\/h4>\n
All programs can work in Polish, English and French.<\/h4>\n<\/section>\n
\nNews<\/strong><\/span><\/h2>\n
\n2025.09.10<\/h4>\n
IgentForm is developing access to the latest technologies. The parametric structure modeler has been adapted to the BIMvision environment (comprehensive IFC file support) and is now available as a plug-in called IgentBIM. This functionality extends the BIMvision environment with editing capabilities. Intuitive parameterization allows you to quickly create advanced models, as well as various variants of the same structure, along with their evaluation according to various criteria. I encourage you to learn more about this innovative functionality at https:\/\/bimvision.eu<\/h4>\n
2024.07.15<\/h4>\n
IgentForm<\/strong> company has entered into cooperation with Robobat Afrique<\/strong> (www.robobatmaroc.com<\/a>), which has received exclusive rights to distribute IgentForm and IgentDraw programs in French-speaking markets. Details here<\/a><\/h4>\n
2022.11.28<\/strong><\/h4>\n
IgentDraw<\/span> program has been enhanced with the ability to create drawings for spread footings<\/h4>\n
2022.11.25<\/strong><\/h4>\n
The latest version of IgentForm<\/span>\u00a0progrm has been approved as a tool to support the design process in conjunction with Autodesk Robot Structural Analysis and Autodesk Revit and is available in the online store Autodesk AppStore (https:\/\/apps.autodesk.com\/pl<\/a>)<\/h4>\n
2022.11.10<\/strong><\/h4>\n
All IgentForm programs have been equipped with a digital signature<\/h4>\n
2022.10.07<\/strong><\/h4>\n
IgentForm software was presented during the international BATIMAT Construction Fair in Paris on 2022.10.03 – 2022.10.06<\/h4>\n
\u00a02022.02.24<\/strong><\/h4>\n
IgentBeam – parametric multi-span beam calculator<\/span><\/h3>\n
The IgentBeam program has been added to the offer, which enables the calculation of multi-span beams using the finite element method.<\/h4>\n
2020.12.11<\/strong><\/h4>\n
Many companies appreciate the benefits of using the BIM approach in design practice.<\/span> One of them is BUREAU D’ETUDES STRUCTURALIS based in Paris, which promotes and offers solutions based on this technology.<\/span> At https:\/\/structalis.fr<\/a><\/span> you can find, among others<\/span> a list of especially recommended plugins \/programs for Autodesk Revit, including IgentForm.<\/span><\/h4>\n
2020.11.03<\/strong>
\nProgram IgentDraw<\/span> , in addition to the parametric creation of drawings of plates, walls and columns, has been enhanced with the possibility of creating drawings for beams. Thanks to this, it is possible to obtain complete drawing documentation for the most common reinforced concrete elements<\/h4>\n2020.09.08<\/strong><\/h4>\n
Program<\/span> IgentForm<\/span><\/span> has been approved as a design support tool in conjunction with Autodesk Robot Structural Analysis and Autodesk Revit and is available in the Autodesk AppStore online store\u00a0(https:\/\/apps.autodesk.com\/pl<\/a><\/span>)<\/strong><\/h4>\n
\n
\n<\/p>\nThank you very much to everyone who visited our company stand during Budma 2020 Fair, which took place in Pozna\u0144 in February 2020.02.04 – 2020.02.07<\/h4>\n
<\/p>\n\n Attention\u00a0<\/strong>(06.12.2019) –\u00a0IgentDraw<\/strong>\u00a0– parametric creation of reinforcement drawings for columns\u00a0(description below)\u00a0<\/span><\/span><\/h4>\n
\n<\/section>\nIgentDraw – parametric creation of column reinforcement drawings<\/span><\/h3>\n
06.12.2019<\/span> – In addition to the possibility of parametric creation of\u00a0plates and walls drawings, the IgentDraw program has been enhanced with the ability to create drawings for columns. Using a parametric approach, creating documentation can be several times faster than using traditional tools. The possibility of working on a DXF foundation, the option of automatic recognition of column cross-sections from a selected layer, and the mechanism of reinforcement generation by assigning appropriate longitudinal and transverse reinforcement patterns mean that in a few minutes documentation can be created even for a large structure. In addition, thanks to the unique real-time regeneration mechanism of the entire model after each modification, the program ensures consistency of created documentation at both the level of drawings and the\u00a0aggregate\u00a0reinforcement table, which is particularly important in case of subsequent changes in the design.<\/h4>\n
Prestressed structures<\/span><\/strong><\/h3>\n
30.11.2018<\/span>\u00a0– One of the forms of IgentForm’s activities is the creation of specialized software for the needs of construction and architecture, based on the latest IT technologies using, among others, parallel processing capabilities.<\/h4>\n
The company IgentForm has recently started cooperation with the company
\u00a0\u00a0gp-projekt\u00a0<\/span>(http:\/\/www.gp-projekt.pl<\/a><\/span>),\u00a0specializing in the design of prestressed structures for building construction. On commission and in cooperation with gp-project<\/span>\u00a0an innovative program called IgentGP was created, which significantly accelerates the creation of project documentation, and one of its unique features is the ability to write generated 3D tendons in IFC format, which allows their use in projects made in BIM technology. The program allows the generation of tendons with a different number of strands with covers in all commonly used compression systems as well as the definition and generation of safety zones due to the potential drilling or punching in concrete beams.<\/h4>\n\u201eIncreasing competitiveness requires the actual implementation of innovative solutions that allow the delivery of modern and useful products to investors, contractors and architects. Implementation of this idea would not be possible without cooperation with IgentForm, which properly understood our need and creatively and patiently worked to achieve the intended goal. This is how we imagined good and flexible cooperation.\u201d<\/em><\/span><\/h4>\n
<\/h4>\ngp-project<\/span> is a design studio providing services in the field of designing construction structures at every stage of the investment. The studio’s specialty is conceptual and optimization projects in which modern solutions and technologies are used, in particular monolithic compression. The company’s portfolio includes numerous facilities completed in Poland and abroad. More information about the company can be found at http:\/\/www.gp-projekt.pl<\/span><\/span><\/span><\/h4>\n
\nCompanies interested in creating a dedicated, high-quality and reliable software are asked to contact us at office@igentform.com<\/span><\/span><\/span><\/h4>\nATTENTION: Load TakeDown<\/strong><\/span><\/h4>\n
15.06.2018 – In IgentForm, the next step was done to implement the calculation capabilities according to the Load TakeDown method. To the possibility of displaying the influence surfaces, the possibility of distributing loads from plates to elements directly supporting the plates\u00a0 and the possibility to export these loads to\u00a0 Autodesk Robot Structural Analysis program have been added. Details in the User Zone<\/span><\/h4>\n
28\/03\/2018 – A new program called IgentPres<\/span> has been added to the offer. It was created in response to the needs of Warbud SA<\/span>, one of the largest construction companies in Poland (www.warbud.pl<\/span>). The software was to help speed up the implementation of the compression project in the field of BIM 3D documentation of the currently built office facility in Warsaw. At present, in the program, based on 2D workshop drawings, it is possible to recover geometry 3D of tendons, parameterize them (anchor types, number of strands, strength parameters, protection zones) and export 3D models of these tendons to IFC format<\/h4>\n
ATTENTION: Novelty<\/strong><\/span><\/h4>\n
On 16.11.2017 IgentDraw<\/strong><\/span> program was added to the offer designed for parametric creation of\u00a0 reinforcement drawings for plates. It was created in the same technology as the IgentForm program. It has the ability to work on DXF background. The final result is the ability to save the drawing and the summary reinforcement table in DXF format. A short description of the functionality of the program can be found below, and a free demo version of the program can be downloaded in the Download section<\/h4>\n
\nIn the current semester in the Department of Building Constructions of the University of Technology and Life Sciences in Bydgoszcz, the IgentForm<\/strong> program will be used by students for modeling of steel towers used for assembly of mobile devices. The coordinator of the project exercise is Mr MSc. Jaros\u0142aw Gajewski. A short English-language video on modeling is available at\u00a0\u00a0https:\/\/youtu.be\/rbYPkQP4O9I<\/a><\/h4>\n
\n26.09.2017 at the Cracow University of Technology was presented and defended diploma thesis by Mrs. Marta T\u0142u\u015bcik entitled “Application of IgentForm program in the practice of parametric design and structural optimisation using BIM technology<\/span>“, led by Dr Eng. Jacek Magiera. Below is a brief outline of a selected piece of work connected with modeling of one of the towers of Absolute Towers complex in Canada.<\/span><\/h4>\n
Download<\/a><\/h2>\n
<\/p>\n
\nATTENTION: Change of the name<\/strong><\/span><\/h3>\n
We inform, that on 30.05.2017 the company name has been changed from IntelForm to IgentForm (new domain www.igentform.com<\/span>)<\/span>
\nDuring the transitional period both old and new name may exist<\/h3>\n
\nFree educational version<\/span>
\nDetails in section Order the program<\/strong><\/h3>\n
\n\u00a0 NOVELTIES: Possibility to generate solids based on DXF \u00a0(29.06.2017)<\/span><\/h3>\n
Details in section User zone<\/strong><\/h3>\n
- \n
- \n
- \n
- \n
- \n
- \n