Skip side cover on bottom edge in case of wall Improved functionality of the option <Bar extension beyond the top edge> for walls with different levels of the top edge (plates at different levels) Possibility to assign longitudinal bars of different diameters to different layers when exporting to DXF Possibility to select the color of bars […]
IgentForm & IgentDraw – noticed problems correction
IgentDraw – position of descriptions in relation to representative bars (plates, walls) IgentForm – functionality of internal lines (alignment to the axis, moving, definition of elements based on DXF)
IgentDraw – Walls module
The following options increase the possibilities of forming reinforcement over openings in walls -Possibility to set the minimum length below which straight bars are ignored -Possibility to turn off edge reinforcement generation above the opening -Possibility to extend the edge reinforcement bars above the opening by the length of the overlap above the top surface […]
IgentDraw – Columns module
Displaying dimensions in a 3D view (so far they were added only at the time of exporting to a DXF file)
IgentDraw – Wall module
Possibility to generate assembly reinforcement in the form of pins
IgentDraw – Column module
Possibility to choose hooks direction
IgentDraw – Improvements in the beam module
Possibility of independent definition of places of division of top reinforcement bars in the case of their length greater than maximum length Possibility to generate anti-shrinkage reinforcement Possibility to use different diameters in the first layer of reinforcement Designation of the beam level in the drawing
IgentDraw – new options
Cutting opening reinforcement to other openings Arranging drawings of beams vertically Optimization of the beam reinforcement type – possibility to set the number of bars directly in the beam Possibility to define the number of elements for slabs and walls Problems correction – no stirrups in the Y direction for the opening close to the edge […]
IgentDraw – beam reinforcement (functionality improvement)
Including plates in the cross-section drawing Bar division for bar lengths greater than the commercial length Correction of noticed errors
IgentDraw – lintel reinforcement
Possibility to generate reinforcement in lintels